Proper advice from Agri doctor on every problem of crop
100% Original Product with Free Home Delivery
Do crop planning with accurate weather information
Farming updates, schemes and plans through Krishi gyan video
60 lakh farmers trust Agrostar
Ratings
3.6
92
14
8
10
42
Key Points
Pump capacity
20 Litre
Battery Type
12 Volt 12 Ah
Spraying capacity
Upto 10-15 Rounds
Charging time
8-10 Hours
Lance type
Stainless Steel telescopic Extendable lance
Nozzles
3 types of Nozzles with washers
USP
• Spray-X 12*12 spray pump is made of high grade, virgin and industrial plastic (PP) which is strong and durable.
• It has a tank capacity of 20 liters.
• On a full charge, it runs up to 10-15 full tank spray.
• Motor Capacity 100 PSI and 3-4 LPM.
• Spray -X comes with original 12V 12Ah battery.
• It comes with 3 types of nozzles option that provide uniform spraying as per nature of the crop & crop height.
• It comes with a sturdy 1.7 A charger.
Charging Indicator
Red: While charging,
Blue: Full charge (On Charger)
Accessories
Hose Pipe, Clutch, Lance, Nozzle set, Big Filter, Inner (small) Filter, Belt Set and Charger
Extra discription
A) How to Use :
1.Each time after using this sprayer, it must be fully charged to maintain inside power and to avoid short working life.
2.When doing charge of discharge, please assure that you have switched off the power to avoid to wasting electricity.
3.After using the sprayer. It should be charged then deposited. If not using the sprayer for long time. Please charge battery approx. once every second month to retain life-spam of battery.
4.After using sprayer, please keep outside and inside of sprayer clean.
Pump Air dry run Problem
A) If for the first time there is no water coming out of the hose but only air, follow the steps below.
1. Open the water outlet cap.
2. Connect the hose pipe tightly to outlet.
3. Fill half the tank with clean water.
4. Turn the switch on.
5. Suck the air from hose pipe by mouth. This will let the air out and the water will flow normally. ( Don't use this method for chemicals used pump ).
Battery loose connection Problem
A) Loose Connection Problem The following method should be used When the pump does not start When the battery is not charging Follow the given steps at a time when the pump is ON and OFF.
1.Remove the screw on the bottom pannel of the pump.
2.Remove the battery packaging straps.
3.Remove the battery.
4.Check the battery connectors and reconnect it properly.
5.Turn ON the button.
6.Please check the light in the voltmeter and see if the motor is on.
Replacement
No Warranty & Guarantee, only transit damages should be notfied within 7 days from the date of delivery.